LD DRYER ERROR CODES

LG Dryer d80, d90 and d95 Error Codes: What They Mean and How to Fix Them

Your LG dryer is running, but clothes are taking longer than usual to dry. Then you notice a d80, d90 or d95 error code on the display. What does it mean, and is something wrong with the dryer?

These warnings are associated with LG’s Flow Sense system, which monitors conditions related to airflow through the dryer and exhaust system.

By 911 Appliance Repair Services – Local Appliance Repair Experts

LG Dryer repair
Quick Answer

What do LG dryer d80, d90 and d95 error codes mean?

LG dryer error codes d80, d90 and d95 are Flow Sense warnings that indicate restricted exhaust airflow. They generally represent estimated airflow restrictions of approximately 80%, 90% and 95%, respectively.

Common causes include lint buildup, a blocked dryer vent, a crushed exhaust hose or an obstructed exterior vent. These warnings do not identify the exact location of the restriction.

What should you do? Clean the lint filter and check accessible venting for visible obstructions. If the warning continues, arrange an inspection. Avoid operating the dryer with a persistent d90 or d95 warning until the airflow problem has been addressed.

Need professional help? Call 647-334-7733 or visit our LG dryer repair services page.

Published: Nov 16, 2026


In many cases, the problem is not a broken dryer component. It may be restricted airflow caused by lint buildup, a crushed vent hose, or a blockage in the exhaust duct.

However, a clean lint filter doesn’t always mean the entire vent system is clear.

This guide explains what LG dryer d80, d90 and d95 warnings mean, what you can safely check, and when professional service may be needed.

LG Dryer d80, d90 or d95 Warning?

Get Help With Your LG Dryer

If your LG dryer keeps showing Flow Sense warnings, takes too long to dry clothes, or stops heating, our technicians can inspect the appliance, identify the cause, and explain your repair options.

✓ LG Dryer Troubleshooting & Repair ✓ Experienced Appliance Technicians ✓ Serving Toronto & Surrounding Areas
Need LG Dryer Repair? Call 647-334-7733
Understanding Flow Sense

What Is LG Flow Sense?

Flow Sense is an airflow-monitoring feature found on many LG dryers. It alerts you when the dryer detects conditions consistent with restricted exhaust airflow.

As clothes dry, warm, moist air needs to leave the dryer through the exhaust duct and outdoor vent. If that path is restricted, drying can take longer and heat can build up.

You might notice damp clothes after a full cycle, repeated drying cycles, unusually high heat, or a Flow Sense indicator. Some LG dryers may also reduce heating or stop a cycle when a significant restriction is detected.

Important: A Flow Sense warning does not tell you exactly where the restriction is. The lint filter, transition hose, ductwork and outside vent may all need to be checked.
Error Code Guide

What Do LG Dryer d80, d90 and d95 Mean?

These warnings indicate increasing levels of estimated exhaust airflow restriction. The percentages are approximate indicators, not a measurement of how much lint is inside the duct.

80

LG Dryer d80

The dryer has detected a significant airflow restriction, commonly described as approximately 80%.

Check the lint screen, accessible exhaust hose and outdoor vent for obstruction.

90

LG Dryer d90

The warning indicates a more severe estimated restriction, commonly described as approximately 90%.

Stop using the dryer until the exhaust path has been checked and the problem addressed.

95

LG Dryer d95

The dryer is indicating an extremely severe estimated airflow restriction, commonly described as approximately 95%.

A thorough inspection of the venting system is important before using the dryer again.

Safety: A heavily restricted dryer vent can create an overheating and fire risk. Do not repeatedly restart the dryer to bypass a persistent d90 or d95 warning.
Common Causes

Why Is Your LG Dryer Showing a Flow Sense Warning?

Airflow can be restricted at several points between the dryer and the outside of the home.

01

Lint Buildup in the Exhaust Duct

Lint can collect beyond the removable filter, particularly in long ducts and bends. A clean lint screen does not mean the entire vent is clear.

02

Crushed or Kinked Vent Hose

The hose behind the dryer can become compressed when the appliance is pushed toward the wall. This reduces the space available for exhaust air to escape.

03

Blocked Exterior Vent Hood

Lint, debris or a stuck exterior damper can restrict the outlet. Outdoor vent openings must remain unobstructed.

04

Long or Poorly Designed Vent Run

Excessive duct length, sharp turns or unsuitable vent materials can reduce airflow even when no single blockage is obvious.

A Flow Sense warning points toward an exhaust airflow issue, but persistent drying problems can also involve the dryer itself. A diagnosis may be needed if the venting is confirmed clear.
Safe Checks

How to Troubleshoot LG Dryer d80, d90 and d95

Start with simple checks that do not require opening the dryer cabinet or working on electrical or gas components.

01

Clean the Lint Filter

With the dryer off and cool, remove lint from the screen. If the screen has residue from fabric products, clean it according to your LG owner’s manual and let it dry completely before reinstalling.

02

Inspect the Hose Behind the Dryer

Check for visible crushing or sharp bends without stretching or damaging the connection. Turn off and unplug an electric dryer before moving it; do not disturb gas connections.

03

Check the Exterior Vent

Look for visible lint, debris or an obstructed flap at an accessible outdoor vent. Do not climb onto a roof or use unsafe ladders to reach an outlet.

04

Arrange Vent Cleaning if Needed

If the warning continues or the duct has not been cleaned in a long time, have the full exhaust run inspected and cleaned by an appropriate professional.

Do not bypass safety devices: Never run a gas dryer with the exhaust disconnected indoors, and do not bypass thermostats, fuses or airflow protections to make the dryer operate.
After Cleaning

Why Does the Flow Sense Warning Keep Coming Back?

If you cleaned the lint filter but still see d80, d90 or d95, the obstruction may be farther along the exhaust duct or at the exterior outlet. A long vent run, crushed hose or poorly configured duct can also continue to restrict airflow.

Follow the model-specific instructions in your LG manual for any available installation or vent-check test. Do not assume the vent is clear just because the dryer runs or the warning temporarily disappears.

If the complete vent path has been checked and the warning persists, the dryer may require professional diagnosis.

Repair or Vent Cleaning?

When Should You Call an LG Dryer Repair Technician?

Consider professional service when the dryer continues to show a warning after the exhaust system has been inspected, when drying performance remains poor, or when you notice unusual heat, burning smells, noises or repeated cycle interruptions.

A technician can evaluate the dryer and help determine whether the issue is related to the appliance, its controls or another component. Vent cleaning may be a separate service if the restriction is inside the building’s ductwork.

Stop using the dryer if you smell burning, notice smoke or suspect overheating. If you smell gas, leave the area and contact your gas utility or emergency services from a safe location.

For appliance diagnosis, visit our LG dryer repair service page or call 647-334-7733.

Frequently Asked Questions

LG Dryer Flow Sense FAQs

Can I use my LG dryer with a d80 warning?

A d80 warning suggests a significant restriction. Check the exhaust system and address the cause rather than continuing to run repeated cycles.

Will cleaning the lint filter clear d90 or d95?

Not necessarily. The blockage may be in the hose, wall duct or exterior vent, beyond the lint filter.

Does Flow Sense mean the dryer is broken?

No. It commonly points to an airflow problem outside the appliance. If the vent system is clear and the warning remains, further diagnosis may be necessary.

Can a clogged dryer vent cause clothes to stay damp?

Yes. Restricted airflow makes it harder for the dryer to remove moisture and can result in longer or repeated drying cycles.

Why Choose 911 Appliance Repair Services?

At 911 Appliance Repair Services, we provide professional appliance repair across Innisfil, Barrie, Bradford, and surrounding areas.

Customers choose us because we offer:

  • Experienced appliance repair technicians
  • Clear diagnosis and repair recommendations
  • Upfront repair pricing
  • 90-day parts and labour warranty on qualifying repairs
  • Licensed technicians for gas appliance work
  • Service for most major appliance brands
  • Same-day or next-day appointments when available

We service refrigerators, washers, dryers, dishwashers, ovens, stoves, cooktops and other major household appliances.

When to Call for LG Dryer Repair

Consider professional service when:

  • Your LG dryer repeatedly displays d80, d90 or d95 error codes.
  • The Flow Sense warning continues after the lint filter and accessible venting have been checked.
  • Clothes take too long to dry or remain damp after a full cycle.
  • The dryer becomes unusually hot or stops during operation.
  • The dryer runs but does not produce enough heat.
  • The exhaust system has been cleaned, but the warning keeps returning.

911 Appliance Repair Services provides LG dryer repair in Toronto, Vaughan, Richmond Hill, Newmarket, Innisfil, Bradford, Barrie, and surrounding GTA communities.

Our technicians identify the cause of the problem before recommending a repair, so you know exactly what needs to be fixed.

How to Book a Repair Service

Ready for a fix or install? Contact us now and see why thousands trust us for appliance repair services and installation!

Scheduling a repair is easy. You can contact us at (647) 334-7733 – or book online through our website. Our service hours are flexible to accommodate your needs.

📍 Local. Reliable. Professional.

Best Service 911 Appliance Repair Services Trusted Across Simcoe & York Region

Thousands of Successful Appliance Repairs

Fast, professional appliance repair for refrigerators, washers, dryers, dishwashers, ovens, stoves, cooktops, and more.

Call 647-334-7733

Areas We Service

911 Appliance Repair Services provides appliance repair across:


If you live in these areas, you can count on us for fast and professional repair services.

professional repair services in gta
PROFESSIONAL APPLIANCE REPAIR

Schedule Service

Ready for hassle-free appliance repairs? Contact Us

Frequently Asked Questions

Not necessarily. The d90 warning represents an estimated airflow restriction level detected by the dryer. It does not mean that exactly 90% of the vent is physically filled with lint.

It may help if the filter is heavily clogged. However, if the restriction is inside the exhaust duct or exterior vent, cleaning the lint filter alone will not solve the problem.

The exhaust may still have an obstruction, an installation problem, or excessive airflow resistance. In some cases, an internal dryer issue may require diagnosis. Confirm that the complete vent route was inspected and cleaned.

Yes. Restricted airflow prevents the dryer from removing moisture efficiently, which can result in longer drying times and damp clothes at the end of a cycle.

No. Many Flow Sense warnings are associated with exhaust restrictions rather than major appliance failures. The cause should be identified before deciding whether repair or replacement is necessary.

911 APPLIANCE REPAIR SERVICES

LG Dryer Still Showing d80, d90 or d95?

If your LG dryer keeps showing Flow Sense warnings or isn’t drying properly, our technicians can inspect the appliance, identify the problem, and explain your repair options.

Experienced appliance repair technicians 90-day warranty on the repaired fault

Sign up for our newsletter