Washer Not Spinning? Control Board or Something Else?
By 911 Appliance Repair Services – Local Appliance Repair Experts
Expert Services You Can Trust
Serving Innisfil, Barrie, Bradford & Nearby Areas
Washer not spinning or showing error codes? Here’s what it could be
Washer not spinning or showing error codes? Here’s what it could be
If your washer turns on but the drum does not spin, it can be frustrating. This is a common problem many homeowners face. Sometimes the issue is simple. Other times, it may require a part replacement.
At 911 Appliance Repair Services, we diagnose washer problems quickly and help you understand what is really causing the issue before any repair is done.
Why Your Washer Is Not Spinning
When your washer does not spin but turns freely by hand, it usually means the motor system is not working properly.
Based on real cases like this , the most common causes include:
- Faulty control board
- Motor or stator issues
- Wiring problems
- Sensor failure
- Bearing issues
👉 The key is proper diagnosis. Guessing can lead to replacing the wrong part.
1. Control Board Failure (Very Common)
The control board is the “brain” of your washer. It sends power to the motor.
If it fails:
- Washer won’t spin
- No response during cycles
- Error codes may appear
In many cases, visible burn marks on the board can confirm damage.
👉 However, not all discoloration means failure. Some boards show wear but still work.
2. Motor and Stator Check
The stator helps turn the drum.
A quick test:
- Resistance between phases should be around 10–15 ohms
If readings are normal, the stator is likely working.
👉 In the example case , the stator tested correctly, which ruled it out.
3. Wiring Issues
Loose or damaged wiring can stop power from reaching the motor.
Check for:
- Broken wires
- Loose connectors
- Burnt connections
If wiring shows strong continuity, it is usually not the problem.
4. Sensor Problems
Some washers use sensors to detect drum movement.
If the sensor fails:
- Washer may not spin
- Error codes like LE may appear
👉 On many LG-based washers, the Hall sensor is a common failure point.
5. Bearing Issues
Bad bearings can also stop spinning.
Check:
- Does the drum spin freely?
- Does it stop quickly?
If it feels tight or noisy, bearings may be the issue.
Is It Worth Replacing the Control Board?
Control boards are expensive. Before replacing it, make sure:
- Motor is tested
- Wiring is confirmed good
- Sensors are checked
👉 Replacing the wrong part is a common mistake.
When to Call for Washer Repair
Call a technician if:
- Washer does not spin at all
- Error codes keep showing
- Burning smell from inside
- You are not sure which part failed
At 911 Appliance Repair Services, we test the system step by step so you don’t waste money on unnecessary parts.
Why Homeowners Trust 911 Appliance Repair Services
We proudly serve Barrie, Innisfil, Bradford, Aurora, and the surrounding areas.
We focus on experience, safety, and honest service.
Trust 911 Appliance Repair Services
Repair Services For All Major Home Appliances
- Refrigerators: From leaks to cooling issues, we handle all refrigerator problems.
- Washing Machines: Whether it’s a faulty spin cycle or drainage issues, we’ve got you covered.
- Dryers: From heating problems to drum issues, our experts can fix it.
- Ovens and Stoves: We repair both gas and electric ovens and stoves.
- Dishwashers: From water not draining to cleaning inefficiency, we provide comprehensive dishwasher repairs.
- Gas Appliances Repair and Installation Services
Reliable appliance repair with fair pricing, service warranties, and a customer-first approach.
Call 911 Appliance Repair Services today
How to Book a Repair Service
Ready for a fix or install? Contact us now and see why thousands trust us for appliance repair services and installation!
Scheduling a repair is easy. You can contact us at (647) 334-7733 – or book online through our website. Our service hours are flexible to accommodate your needs.
📍 Local. Reliable. Professional.
Areas We Service
911 Appliance Repair Services provides wahing machine repair across:
If you live in these areas, you can count on us for fast and professional repair services.
Quick Answer: A washer that is not spinning is usually caused by an unbalanced load, lid switch failure, or drain issue. In some cases, a control board or motor problem may be responsible.
Frequently Asked Questions
Still not sure why your washer is not spinning? Call 647-334-7733 for a diagnosis.
